1. The remote control operation should be adopted in the use of General Assembly Requirements for trackless electric flat rail transfer carts.The batteries of the remote controller should be replaced frequently to avoid damage to the controller. If you do not use the electric flat car for a long time, please pull out the key of the remote control to prolong the battery life.
2. If you do not use the General Assembly Requirements for trackless electric flat rail transfer carts for a long time, please close the emergency stop button of the flat car and turn off the sound and light alarm to save the battery power.
3. The wheels and reducers of General Assembly Requirements for trackless electric flat rail transfer carts should be lubricated regularly.
Implementation Regulations for Inspection of General Assembly Requirements for trackless electric flat rail transfer carts:
1. To ensure the quality of the outsourced parts, the main outsourced parts of General Assembly Requirements for trackless electric flat rail transfer carts need to provide qualified certificates, etc.
2. In the manufacturing process of trackless General Assembly Requirements for trackless electric flat rail transfer carts, Party B accepts regular and irregular inspection of manufacturing quality by Party A.
General Assembly Requirements for Trackless Flatbed Vehicles:
1. The limit deviation of wheelbase of General Assembly Requirements for trackless electric flat rail transfer carts is (+2.0mm).
2. The moving end of the two wheelset bearings of the General Assembly Requirements for trackless electric flat rail transfer carts shall be installed on the same side of the vehicle.
.jpg)
