What are the requirements for the industrial rail trolley?

 

   1. Control system: There is a control box on the ground. There are left-hand, right-hand, jog and stop buttons on the control box, and corresponding indicators are provided.

 

   2, rust coating requirements

 

   The surface descaling of steel plates, profiles and castings and forgings reaches ST2 in GB8923. The film thickness is 90-120um. All exposed work surfaces are rust-proof before leaving the factory. The surface is coated with anti-rust primer, dark gray finish, and the guide rail is not painted.

 

   3. Control box system: The control box is made of steel plate, beautiful and practical, the surface is treated with anti-corrosion treatment. The thickness of the box is not less than 2 mm. There is a good heat dissipation device. There is a practical inspection lamp inside the control box. The door lock is firm and reliable. Easy to use, no interference.

 

   4. Equipment configuration: All kinds of famous brand industrial components should be selected to provide sufficient guarantee for the overall reliability of the equipment.

 

   5. Frame system: The frame structure of the frame is composed of a longitudinal beam, a beam and a steel plate to form a "#" character skeleton frame structure, and a steel plate is laid on the work surface. The profiles and steel plates used comply with the corresponding national standards.

 

   6. Transmission system: The motor drives the reducer to transmit the power to the rotary device and drive the rotary table to rotate. Each component is reliably coupled to the body. The motor uses a brake motor with a degree of protection of IP44 and an insulation class of E.

 

   7. Equipment structure: industrial rail trolley consists of frame, rotary table, drive unit and control box. The rotating table body is equipped with a guide rail. The rotary table is composed of a rotary configuration and a work surface produced by the introduction of German advanced patent technology, and can be rotated by 90. It has the characteristics of flexible rotation, quick response, safe and reliable performance. The track docking is realized by the frequency converter to realize the automatic deceleration control, and an electronically controlled safety limit device is arranged between the two positions to ensure accurate positioning when the rotary table rotates, so that the body guide rail and the ground track are well aligned; There are auxiliary support wheels to ensure the safety and stability of the rotating table.