The problem of the out of control speed of the electric rail motorised transfer cart belt pulley
2018-09-05
The problem of the out of control speed of the electric rail motorised transfer cart belt pulley
The speed of the electric pulley is out of control
1: electric rail motorised transfer cart.The speed of the electric pulley is too fast or too slow. The main reason for this is that the roller motor inside the electric flat car is faulty. The too fast may be caused by the burnout of the step-down circuit. If it is too slow, it is caused by the failure of the partial damping resistor. The circuit control system of the roller motor of the electric transfer carriage .
2: electric rail motorised transfer cart.The electric flat belt pulley does not turn when turning. This is generally caused by the unstable inlet voltage of the electric flat car. Check if the voltage input system is faulty.
Second, the electric pulley is slipping;
1: electric rail motorised transfer cart.The pulley of the electric flat car has a constant decrease in the friction coefficient of the pulley due to long-term use. Finally, the belt is too smooth and slippery. In this case, the belt must be replaced.
2:electric rail motorised transfer cart. During the installation process of the electric flat belt pulley, there is no positioning fixture, or the positioning fixture fails, causing the belt to loose during operation, and checking the positioning and fixing parts
.jpg)
