Design Requirements for Motorless Rail Flat Wagons Trackless Handling Vehicle Trolley Cart can with Lifting and Turntable is generally necessary to determine the following:
1. The rated bearing capacity can be designed according to the need.
2. The bearing area and the bearing width and length of the flat-panel Trailer should be designed according to the need.
3. Whether the tire model is solid or air tire, solid tire wear-resisting, non-burst tire, air tire travel faster;
4. Other configurations, such as double traction, guardrail, van type, brake system, shock absorption system, awning, rope knot net, etc.
Correct operation of Design Requirements for Motorless Rail Flat Wagons Trackless Handling Vehicle Trolley Cart can with Lifting and Turntable
1. Find the trailer hook position behind the tractor and in front of the tractor. Many cars'Trailer hooks are designed in the lower part of the bumper, which is usually marked in the vehicle manual. The owner can also find hidden space by observing the front and rear bumpers. The position covered by a round or square cover is where the trailer hooks are located.
2. The Design Requirements for Motorless Rail Flat Wagons Trackless Handling Vehicle Trolley Cart can with Lifting and Turntable hooks of some automobiles are separated and need to be assembled when they are used. After removing the cover on the bumper, assemble the hook carried on board.
3. Install Trailer tools. Whether soft or hard Trailer tools are selected, the installation should ensure that the car hook is firmly and reliably connected, and the safety lock on the hook should be in place. Check the connection before and after the Design Requirements for Motorless Rail Flat Wagons Trackless Handling Vehicle Trolley Cart can with Lifting and Turntable runs again. The soft trailer rope with no tow hook at both ends should be tied with a loose knot when used. If the knot is tied to death and pulled by a huge traction force, the trailer rope will be difficult to untie.
4. The tractor starts with one gear to ensure that the large torque provides enough traction. At the same time, the tractor needs to control the speed and keep running smoothly, and increase the power output when it feels a little resistance. Manual gear type avoids to lift the clutch pedal sharply, and adopts half linkage to start slowly, so as not to cause damage to the Design Requirements for Motorless Rail Flat Wagons Trackless Handling Vehicle Trolley Cart can with Lifting and Turntable.
